Online DT Swiss EXC 1501 Spline庐 One 30 Carbon 6-bolt Boost 29″ Wheelset

The DT Swiss EXC 1501 Spline One combine everything a modern enduro rider wants in one wheelset. The 30 mm wide carbon rims give you the precision to stay on track even on the trickiest lines while a 240 hub with the latest Ratchet EXP freehub system puts your power down to the ground. Both components are held together by performance weight optimized competition race straightpull spokes.

Maximum speed guaranteed: with the EXC 1501 Spline^® One from DT Swiss

Cycling is physics. During cornering, lateral forces impact the tyre. The tyre contact patch moves in the opposite direction to the lateral force. When cornering with a narrow rim, the tyre contact patch moves sideward and is not supported through the rim. This results in an unstable riding experience. The resulting folding in the tyre creates tension and the tyre pulls to the opposite bead. This causes a loss of air between the tyre bead and the rim bed, a so-called tyre burping. The tyre contact patch of the wide rim is inside the rim flanges. The side wall of the tyre is supported by the wide rim, which increases control. A wider rim can therefore be ridden with lower air pressure than a narrower rim.

And lower air pressure means less rolling resistance. A wheel with low tyre pressure will always roll over rough surfaces more easily than a wheel with high pressure, as the tyre is able to adapt to the ground. A wheel with a high air pressure cannot absorb obstacles and the bike must move upwards, comparable to lifting work, which increases rolling resistance. Less air pressure leads to less fatigue, as the rider has to invest less lifting work.

Product features – EXC 1501 Spline One 30mm Carbon

• Use: Enduro
• Model: EXC 1501 Spline One
• Wheel size: 29″
• Rim diameter: 622mm
• Rim type: Clincher
• Tubeless ready: ✔
• Inner width: 30mm
• Outer width: 36mm
• Axle system
  • Front: Boost 15/110mm (Thru Axle)
  • Rear: Boost 12/148mm (Thru Axle)
• Hub Type: 240 Straightpull hub
• Freehub Body: NEW Ratchet EXP 36 System
• Freehub: SRAM XD Driver (ASRAM) pre-installed
• Valve hole: Presta / SV Ø 6.5 mm
• Rim: Carbon, hookless bead, UD finish
• Spokes: DT Competition Race^® straightpull (black)
• Nipples: DT ProLock^® Squorx ProHead (black)
• Holes/Spokes: 28
• Lacing: 3-cross (1:1)
• Disc Mount: Disc IS 6-bolt
• Recommended system weight max: 130kg (body weight + bike + equipment)
• ASTM Classification: 4

Material

• Rim: Carbon
• Hub: Aluminum
• Spoke: 18/10 Stainless steel
• Nipple: Aluminum
• Freehub body: Aluminum

Color

• black

Weight (manufacturer information)

• Front: 802g
• Rear: 899g
• Wheel Set: 1701g

Scope of delivery

• 1 EXC 1501 Spline One 30 Carbon 6-bolt Boost 29″ Wheelset (SRAM XD Driver pre-installed)
• 2 Tubeless Tapes 32mm
• 2 Tubeless Valves Aluminum black 18-25mm
• 1 Shimano Micro Spline freehub kit